Knowledge Base

Our dedicated Product Specialist team is always ready to help you when you need it the most. Contact Support

PXE boot error: ‘No DHCP or proxyDHCP offers received.’

The client machine doesn’t retrieve an IP adress. This is happening very early on in the deployment process, before Specops Deploy is seriously involved and the connection with the Deployment server/WDS is established. This is most likely a network related issue and we recommend to start with the simplest thing: to check your physical network cables etc. and also make sure that the DHCP server service is up and running and that the configuration looks right. If you use forwarding mechanisms between subnets for DHCP broadcasts then our suggestion is to take a look at those as well.


October 15, 2018

Was this article helpful?

Related Articles